17
Checking the Machine for
Grease
Parts needed for this procedure:
No. 2 lithium or molybdenum grease. (Purchase
1 tube
separately.)
Procedure
Before you use the machine, check the machine for
grease; refer to Lubrication in the Operator's Manual.
18
Removing the Shipping
Straps
For Machines with MyRide
Suspension System Only
No Parts Required
Procedure
WARNING
The springs are compressed by the shipping
straps. When the straps are cut, the seat
will raise up quickly by approximately 8.9 cm
(3-1/2 inches).
Note:
Ensure that the straps are removed before
operating the machine.
13
™
Figure 28
g030083