GE 28821 Series User Manual page 86

1. Press the caller ID-volume (6 or 5) button to scroll to the REGISTRATION sub-menu.
2. Press the mute/menu OK
The default setting is 2NO.
3. Use the touch-tone pad to select 1 for YES or for NO. Or use the caller ID-volume (6 or 5) button to scroll to
1YES or 2NO.
4. If you select 1YES, press the
HANDSET PROGRAM shows in the display. (Your handset should be held near the base during registration
process.)
5. Press and hold the page button on the base unit, the
handset mute/menu OK
the handset display, where X is the handset number. You may now rename your handset. (Refer to Step & of
Handset Name Section)
NOTE: IF you are re-registering the handset through the handset menu; to rename your handset
you must go to the Handset Name Section and start from the beginning step.
De-Registration
De-registration cancels registration. During the de-registration process, keep the handset near the base.
From the Handset Setup Menu:
1. Press the caller ID-volume (6 or 5) button to scroll to the DEREGISTRATION sub-menu.
2. Press the mute/menu OK
The default setting is "2NO".
3. Use the touch-tone pad to select 1 for YES or for NO. Or use the caller ID-volume (6 or 5) button to scroll to
1YES or 2NO.
WARNING: It is not recommended that a handset be de-registered unless absolutely necessary
because once a handset is de-registered, that handset's telephone features cannot be used until
the handset is re-registered.
4. Select NO, if you do not want to de-register.
5. If you select 1YES, press the
CONFIRM? 1YES 2NO appears in the display.
6. Press the touch-tone pad to select 1YES or 2NO, or use the caller ID-volume (6 or 5) button to scroll to
1YES or 2NO.
7. If you select YES, press the
hear a confirmation tone. Then HANDSET X DEREGISTERED shows in the display to confirm the handset is
deregistered.
NOTE: When you complete the de -registration process, HANDSET NEEDS REGISTRATION shows in
the display. To use the handset, you MUST re-register the handset using the Registration process.
Global De-registration
If one or more handsets become lost, you should de-register all handsets to ensure proper system operation.
WARNING: It is not recommended that a handset be de -registered unless absolutely necessary
because once a handset is de-registered, that handset's telephone features cannot be used until
the handset is re-registered.
1. Disconnect power from the base by pulling the plug out of the back of the unit.
2. Press and hold the page button and while holding the page button reconnect the power.
3. Continue to hold the page button until the
4. Release the page button.
5. Press and release the page button on the base once. All handsets are de-registered and HANDSET NEEDS
REGISTRATION shows in the display.
Default Setting
As you become familiar with this system, you may prefer to use the system's original settings. Follow the steps
button to enter the menu. REGISTRATION 1YES42NO - - - shows in the display
mute/menu OK button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS
button. REGISTERING shows in the display. HANDSET X REGISTERED shows in
button to enter the menu. DEREGISTRATION 1YES42NO - - - shows in the display
mute/menu OK button and MOVE NEAR TO BASE displays for seconds, then
mute/menu OK button to confirm. DE-REGISTER... shows in the display. You will
charge/in use voicemail
charge/in use voicemail
light flashes rapidly.
indicator flashes. Press the