Table of Contents
Advertisement
1. Make sure the phone is OFF (not in TALK mode).
2. Press and release the
3. Use the touch-tone pad to enter the handset number you want to page.
4. To cancel the page, press the END/cancel, delete/intercom/conf, or
press the
END/cancel
Paging All Handsets from a Handset
1. Make sure the originating phone is OFF (not in TALK mode).
2. Press and release the
3. Use the touch-tone pad to enter the handset number you want to page. (1= to page Handset 1, 2=to page
handset 2, etc., and
4. To cancel the page, press the END/cancel, delete/intercom/conf, or
press the
END/cancel
Paging from the Base/Group Page
Use the base-only to page all registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on
each handset's display.
2. To cancel the page, press the page button on the base, or press the
each handset.
Mute
To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot
hear you, but you can hear them.
1. Press the
mute/menu OK
2. Press the
mute/menu OK
Receiver Volume Control
When the handset is ON (in TALK mode) you may adjust the receiver volume by pressing the caller ID-volume
(6 or 5) button. There are
reached, the phone beeps twice. VOL 1 is minimum and
Do Not Disturb (D-N-D)
This feature allows you to turn off all the handset ringer(s) at once, by pressing one button at the base unit, even
though the ringer volume of handset(s) has been preset.
1. In the standby mode, press the DO NOT DISTURB button on the base.
2. The DND indicator will light and DO NOT DISTURB shows in each handset display.
3. To cancel, press the DO NOT DISTURB button again.
NOTE: You can press the DO NOT DISTURB button and activate the function immediately, even
when there is incoming call ringing in, or during call screening after the call is taken by the
answerer.
Intercom Operation
The intercom feature allows you to have a conversation with another registered handset without tying up the
telephone line, allowing you to still receive incoming calls.
Making an Intercom Call
1. Make sure the handset is OFF (not in TALK mode).
2. Press the
delete/intercom/conf
3. Use the touch-tone pad to select the handset you want to page.
NOTE: To cancel page, press the
delete/intercom/conf
button on the receiving handset.
delete/intercom/conf
*
tone=to page all handsets)
button on the receiving handset.
button. The handset display shows MUTE ON.
button to cancel and return to your phone conversation.
five
volume levels to choose from. When the maximum or minimum volume level is
(applicable only with additional handsets)
button on the handset.
delete/intercom/conf
button on a handset. PAGING EXTENSION? shows in the display.
(applicable only with additional handsets)
button on a handset. PAGING EXTENSION? shows in the display.
VOL 5
is maximum.
button again or the
TALK
button on the originating handset, or
TALK
button on the originating handset, or
TALK
button or the
END/cancel
END/cancel
button on
button on the
Advertisement
Table of Contents
