External Switch Operation; External Switch Input - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 6. OPERATION

6-4 External Switch Operation

■ External switch input

●Types of external switch inputs
NOTE
6-8
A total of 16 external switch inputs are available. Each input is called SW1, SW2, etc.
up to SW16. (SW: external switch input)
SW1 to 4 and SW9 to 16 are tied.
SW5 to 8 functions are selected using setup data
SW9 to 16 are for program selections. Selections are made by entering BCD code or
binary codes in setup data
weight is for binary figures and the left is for BCD.
External
switch number
SW1 RUN
SW2 HOLD
SW3 RESET
SW4 ADV
SW5 Selects one of the following functions using setup settings.
SW6 RAMP-E
SW7 FAST
SW8 Clears G.SOAK using the OR condition.
Clears G.SOAK using the AND condition.
MANUAL/AUTO
AT start/stop
PV1/PV2 (OFF: PV1, ON: PV2)
AUTO Loading (the DCP551E***** model only)
PV1 → PV2 standby (See page 5-35.)
PV2 → PV1 standby (See page 5-35.)
Normal/Reverse operation
SW9 Selects program number, weight 1
SW10 Selects program number, weight 2
SW11 Selects program number, weight 4
SW12 Selects program number, weight 8
SW13 Selects program number, weight 10 or 16
SW14 Selects program number, weight 20 or 32
SW15 Selects program number, weight 40 or 64
SW16 Selects program number, weight 80 or 0
• When G.SOAK is cleared using an OR condition and an external switch is on, or PV
enters the G.SOAK width, a G.SOAK wait is cleared.
• When G.SOAK is cleared using an AND condition and an external switch is on and
PV enters the G.SOAK width, a G.SOAK wait is cleared.
• A normal or reverse operation is performed according to setup data setting
when the external switch is off. When the external switch is on, a normal or reverse
operation that is the reverse of setup data setting
C71
C75
. When two weights are given for an item, the right
Function
C23
C74
to .
Detection way
Leading edge
Leading edge
Leading edge
Leading edge
Leading edge
Leading edge
Status
Status
Leading/trailing edge
Leading/trailing edge
Status
Leading edge
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
Status
is performed.
C23