Kenwood KFCD60B15 Installation Instructions Manual page 9

installation
1. Remove all fridge door shelves and water tank
from the upper door. Remove the upper cover,
upper corner cover and upper door corner block.
Upper corner cover has left and right side.
There is the letter "L" and "R" at the back to
identify which side it belongs to. The upper
corner cover packed as an accessory is for
the right side.
2. Remove the upper hinge cover, screws and
upper hinge. Lift the upper door and place it on a
padded surface to prevent from being scratched.
Upper hinge cover has left and right side.
The upper hinge cover packed as an
accessory is for the left side.
3. Remove the stopper from the bottom of
the upper door and move it to the opposite
side. Screw tightly. Remove also the upper
door stop block. For the opposite side, use
another stop block and screw tightly.
Upper door stop block has left and right
side. The upper door stop block packed
as an accessory is for the left side.
4. Remove the middle hinge. Lift the lower
door and place it on a padded surface to
prevent from being scratched.
5. Remove the stopper and lower door stop
block from the bottom of the lower door
and move them to the opposite side. Screw
tightly.
9