Troubleshooting - Philips 5000 Series Manual

20
English
Ordering accessories

Troubleshooting

Shaver
Problem
The appliance
does not work
when I press the
on/off button.
8 Reinsert the hinge of the shaving head holder into
the slot of the shaving unit. Close the shaving head
holder ('click').
9 After replacing the shaving heads, you can reset
the replacement reminder by pressing the on/off
button for 7 seconds. Wait until your hear 3 beeps.
If you do not reset the replacement reminder, the
shaver resets automatically after 9 shaves.
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go to
your Philips dealer. You can also contact the Philips
Consumer Care Center in your country.
The following accessories and spare parts are
available:
- SH30 Philips shaving heads
Note: The availability of the accessories may differ by
country.
This chapter summarizes the most common problems
you could encounter with the appliance. If you are
unable to solve the problem with the information
below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer
Care Center in your country.
Possible cause
The appliance is still
attached to the wall
socket. For safety
reasons, the
appliance can only
be used without cord.
The rechargeable
battery is empty.
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Recharge the battery.