Table of Contents
Advertisement
Listening to the memorised station
" Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Listening to the radio" on page 16.
2
Press
the
MEMORY/SET
(MEMORY) button to enter the
preset tuning saving mode.
3
Within 5 seconds, press the
PRESET (
or
) button to se-
lect the preset channel num-
ber.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the
MEMORY/SET
(MEMORY)
button to store that station in
memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
" To recall a memorised station
Press the PRESET (
or
) button for less than 0.5 seconds to
select the desired station.
Preset channel
Frequency and frequency band
" To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1
Press the PRESET (
or
) button for more than 0.5 sec-
onds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
or
) button again when the desired
station is located.
" To clear a memorised station
1
Recall the memorised station.
2
Whilst it is displayed, press the MEMO-
RY/SET (MEMORY) button.
3
Within 5 seconds, press the CLEAR but-
ton on the remote control.
04/3/31
XL-S15H_E_2.fm
XL-S15H
1
2
3
4
5
6
7
8
9
10
17
TINSEA028SJZZ
Advertisement
Table of Contents
