Table of Contents
Advertisement
" Connecting the AC power lead
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
Note:
Unplug the unit if it is not to be used for a prolonged period of time.
Remote control
" Battery installation
Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Replace the cover.
Precautions for battery use:
! Replace all old batteries with new ones at the same time.
! Do not mix old and new batteries.
! Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
Caution:
! Do not use rechargeable batteries (nickel-cadmium battery, etc.).
! Installing the batteries incorrectly may cause the unit to malfunc-
tion.
" To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to the stand-by mode:
Press the ON/STAND-BY button again.
Notes concerning use:
! Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
! Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
! Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
! Keep the remote control away from moisture, heat, shock, and
vibrations.
" Test of the remote control
Face the remote control directly
to the remote sensor on the unit.
Press the ON/STAND-BY but-
ton. Does the power turn on?
Now, you can enjoy the music.
04/3/31
XL-S15H_E_1.fm
XL-S15H
1
2
3
4
5
6
Remote sensor
7
0.2 m - 6 m
(8" - 20')
8
9
10
9
TINSEA028SJZZ
Advertisement
Table of Contents
