Table of Contents
Advertisement
- Edge mode (TriggerSequence0)
The exposure time is determined by Exposure Time setting.
- Level mode (TriggerSequence1)
The exposure time is determined by the pulse width of the trigger signal.
- Bulk mode (TriggerSequence6)
Camera exposes and transfers multiple frames by a single trigger.
Trigger
Exposure
USB Streaming
Operation point of HardwareTrigger is at the edge of trigger signal, and active edge polarity is able to change
by register setting. And you can add delay time from trigger edge to exposure start by register setting.
USB Streaming
Details of Random Trigger Shutter operation, refer to "Timing" of "Specification".
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Trigger
Exposure
USB Streaming
Trigger
Exposure
USB Streaming
ExposureTime
Trigger sequence
Trigger signal
Exposure
ExposureTime
Image
Pulse Width
Image
TriggerAdditionalParameter = 3
Image
Image
TriggerDelay
Trigger Delay
53 / 92
Image
Image
D4253386C
http://www.toshiba-teli.co.jp/en/
Advertisement
Table of Contents
