Table of Contents
Advertisement
the control panel
Programme Selection Dial
Different programmes can be
selected according to your
requirements.
To set your Favourite
programme, turn the dial to the
desired programme, adjust the
water temperature, spin speed
and other function options, then
press and hold Speed button
until a beep is heard.
Button
Water Temp.
Speed
Delay
Function
Dry
On/Off
Start/Pause
• If you need to change a setting after the wash has started, switch the machine off. Switch
on the machine. Re-select the programme, spin speed and optional functions, and
then press the Start/Pause button. (Ensure the Child Lock is off, otherwise the original
programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the washing
machine. This is not an indication of a malfunction.
During initial start-up and use of the unit, there may be a slight smell while the motor is
settling in. This is not a fault; this is normal operation.
LED Display
• Show the delay time and error code.
• After the wash procedure begins, the display will show the wash
remaining time, spin speed and other function options.
• When the child lock function is selected, the Child Lock indicator will be
illuminated.
• When the door is at the lock state, the Door Lock indicator will be
illuminated.
Press continuously to select the desired water temperature of the
selected programme.
Press continuously to select the desired spin speed of the selected
programme.
This button is used to delay start the wash. Press continuously to select
the time you want to start the wash.
Press continuously to select optional function.
Press continuously to select the desired drying level of the selected
programme.
Press to turn on/off the machine.
Press to start your wash. Press while in operation to pause your wash.
Function
15
Advertisement
Table of Contents
