Kenwood K8W6D18 Installation Instructions Manual page 5

8kg / 6kg washer dryer
Table of Contents

Advertisement

• Before you start using the machine, turn the tap on to check that the hose is
properly connected. If it's not, there may be a water leak.
• Do not put too much laundry or detergent into the machine. It may cause
issues with the machine or laundry.
• The appliance is not to be used if industrial chemicals have been used for
cleaning.
• Lint must not be allowed to accumulate around the appliance.
• Do not dry unwashed items in the appliance.
• Fabric softeners, or similar products, should be used as specified by the
fabric softener instructions.
• The appliance must not be installed behind a lockable door, a sliding door
or a door with a hinge on the opposite side to that of the appliance, in such
a way that a full opening of the appliance door is restricted.
• Be careful not to get your laundry caught in the door when you close it. This
could cause a water leak or damage your laundry.
• This appliance is intended to be used in household and similar applications
such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
• This appliance is not intended to be used in areas for communal use in
blocks of flats or in launderettes. It is for indoor use only and not intended to
be built-in.
• Adequate ventilation should be provided. The ventilation openings in the
base of the machine must not be obstructed by a carpet.
• Your product is suitable to operate in ambient temperatures between 0°C
and 40°C.
• Ambient temperatures between 15°C and 25°C are ideal temperatures for
your product.
Power Source and Cable
• Use an independent household dedicated mains socket, rated at 13 Amp
220V to 240V AC. If the machine is plugged in with other appliances, it may
overheat and cause a fire.
• Make sure the mains plug is pushed firmly into the socket. A loose
connection may overheat and cause electrical shock or a fire.
• Check the mains lead and mains plug for any damage. If the mains cable
is damaged, it must be replaced by the manufacturer, its service agent or
5

Advertisement

Table of Contents
loading

Table of Contents