Table of Contents
Advertisement
Getting Started
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact your DSL/
ADSL provider) to the telephone line between the
base unit and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Call Display features do not function properly.
To connect to a 2-line telephone jack
For this connection, please purchase a 2-line
splitter.
Example: DSL/ADSL line is line 2
Connect the "Transparent" plug telephone line
cord (2-wire cord) (
3
(
) until you hear a click.
Connect the "GREEN" plug telephone line
cord (4-wire cord) (
4
(not supplied) (
), then to the 2-line splitter
3
(
) until you hear a click.
Connect the 2-line splitter (
telephone jack (RJ14C) (
click.
5
"Transparent"
plug
3
4
*DSL/ADSL filter (not supplied) is required if you
have DSL/ADSL service.
To connect to 2 single-line telephone jacks
Example: DSL/ADSL line is line 2
Connect the "Transparent" plug telephone line
cord (2-wire cord) (
single-line telephone jack (RJ11C) (
you hear a click.
10
TG9541C(en)_0723_ver012.pdf
10
1
) to the 2-line splitter
2
) to a DSL/ADSL filter
3
) to the 2-line
5
) until you hear a
1
2
"GREEN"
plug
1
2
1
) to the unit, then to the
2
) until
Connect the "GREEN" plug telephone line
3
cord (4-wire cord) (
) to a DSL/ADSL filter
4
(not supplied) (
), then to the single-line
telephone jack (RJ11C) (
click.
1
"Transparent" plug
1
2
4
5
*DSL/ADSL filter (not supplied) is required if you
have DSL/ADSL service.
Battery installation
R USE ONLY Ni-MH batteries AAA (R03) size
(A).
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
1
R Follow the directions on the display to set up
the unit.
Battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (A).
2013/07/23
5
) until you hear a
2
3
"GREEN"
plug
,
).
12:24:51
Advertisement
Table of Contents
