Landock; Landock - Fujitsu 735Dx User Manual

If the total memory displayed is not what you
believe it should be, check that your memory
upgrade module is properly installed. If it is
properly installed and the capacity is not cor-
rectly recognized,see the Troubleshooting
Section starting on page 119.
Undock Request Button
Ready to Undock LED
Docked LED
DC Power Jack
PS/2 Mouse Port
Headphone
Jack
PS/2 Keyboard Port
U s e r
C A U T I O N
Follow the instructions that came with
your LANdock. These instructions and
illustrations in this manual are only to
serve as a guideline. The LANdock manual
that is included with the LANdock unit
supersedes these instructions
RJ-11 Jack
RJ-45 Jack
Dual USB Ports
MIDI/Joystick Port
Serial Port
I n s t a l l a b l e F e a t u r e s
External Monitor Port
External Floppy
Disk Drive Port
PCCard Slot
Parallel Port
Figure 4-14 LANdock Rear View
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u

LANDOCK

The LANdock is powered from an AC adapter
which comes with it.
To Install your Notebook in a docking device:
1. Put your notebook in Suspend mode or
turn off the power.
2. To use a docking device with your note-
book they both must be on a flat surface.
3. Remove all connections from the rear panel
of your notebook. (See Figure 1-9 on
page 8.)
4. Make sure that the adjustment feet are flat
against the bottom of the notebook and the
covers of the connectors, both rear panel
and right side panel,are closed.
5. Make sure that the slide cover in the rear
panel is completely open.
111