Table of Contents
Advertisement
Channel Number
82
84
86
5. To select the fixed data rate at which you want the station to transmit,
double-click on rateCtrlEnable from the same registry key location where
clist resides, and enter 0 to disable rate adaptation. Double-click on
TransmitRate and enter the value specified in the following table to select
the actual data rate. For example, enter 3 for 18 Mbps.
Rate Number
0
1
2
3
4
5
6
7
6. For the changes to take effect:
−
If you are running Windows 98SE or Windows Me, close Register
Editor and restart the systems.
−
If you are running Windows 2000 or Windows XP, unload and load
the driver from LinkMon.
7. To undo these changes and go back to normal operation where the
channel and data rate are dynamically set, change rateCtrlEnable to 1
and clear the clist value.
Channel Frequency
5.41 GHz
5.42 GHz
5.43 GHz
Data Rate
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
Regulator Domain
N/A (not calibrated)
N/A (not calibrated)
N/A (not calibrated)
Advertisement
Table of Contents
