Table of Contents
Advertisement
3. In ad hoc mode, a station scans the air for an existing BSS. If no BSS is
TCP/IP Setup
After configuring the D-Link DWL-A650 Wireless Network Adapter through
the Network Control Panel, the TCP/IP address for the network device needs
to be configured.
1. From the Start menu, choose Programs > Accessories >
found, the station establishes a BSS for other stations to join. When other
stations scan the air and find an established BSS in place, they join that
BSS to form an ad hoc network. If a specific set of stations requires ad
hoc network connectivity, it is recommended to have one station establish
a BSS first before configuring the remaining stations. This prevents the
scenario of several stations trying to form a BSS at the same time, which
can result in multiple singular BSSs being established, rather than a
single BSS with multiple stations.
Communications > Network Connections. Find the "Local Area
Connection" that is associated with the D-Link DWL-A650 Wireless
Network Adapter. Right-click that connection and click Properties.
5-15
Advertisement
Table of Contents
