Fujitsu Plasmavision P42VHA10W User Manual page 26

ADJUSTING PICTURES (PICTURE MENU) (Continued)
• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.
Select the item with
Adjustment Item
Contrast
Brightness
Color
Tint
Sharpness
• Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press or , one of the available choices appears in the following sequence:
Dinamic:Suitable for watching a normal motion picture.(Standard)
Fine: Suitable for watching a dark picture such as movie.
Real 1: Makes a strong contrast picture.
Real 2: Makes a bright color picture.
Static: Suitable for watching a still picture.
Press to store.
*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.
• Precision Setting (for more advanced adjustment)
Luminance, Black Level, Color Temperature, and User Color Temperature are adjusted as shown in
the following chart.
Select the item with , and then adjust with
adjustments.
Adjustment Item
Luminance Adjusts the luminance level.
(when the Picture Mode is Fine)
Black Level Adjusts the picture when watching a dark
image. (when the Picture Mode is Fine)
Color Temperature Set to low to obtain a warm atmosphere,
and set to high to obtain a cold atmosphere.
User Color Enables individual adjustment of Red,
Temperature Green and Blue.
E-26
, and then adjust with . Finally, press
Lower contrast
Darker screen
Lighter colors
More purplish colors
Softer pictures
. Finally, press
Contents of Adjustments
to implement the adjustments.
Higher contrast
Brighter screen
Darker colors
More greenish colors
Sharper pictures
to implement the
Operation
Use to adjust.
Use to adjust.
Use to adjust.
Use to select, and use
adjust.
Adjustment Range/Remarks
–30 to +30
–60 to +60
–60 to +60
–60 to +60 (RGB, Comp. video)
–30 to +30 (Video, S-video)
–4 to +4 (RGB)
–16 to +16 (other than RGB)
Adjustment Range/Remarks
40 to 100%
–15 to +15
–3500 to +3500
to 0 to 255