Assembly-3: How to distinguish the side of Optical Filter Block
facing to Lens Device
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens
device. Distinguish the IR cut coated side from the other by applying the
fluorescent light to the Optical Filter Block in the dark place (cut off the
outside light).
Optical Filter Block
Hold it with tweezers or the like.
[IR Cut Coated Side]
[The Other Side]
Lens Device side
• The other surface
The red coating is
not reflected.
• Side view
The red belt
is seen.
• IR cut coating surface
The red coating is reflected.
Lens Device side
HDR-CX530E/CX535/CX610E/PJ530E/PJ540/PJ540E/PJ610E_L2
3-2E