Card Reader - Lenovo ThinkCentre M70c Hardware Maintenance Manual

5. Disconnect the ThinkCentre LED dot cable from the system board.
6. Remove the ThinkCentre LED dot.
7. Install the ThinkCentre LED dot.
8. Connect the new ThinkCentre LED dot cable to the system board.
9. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

Card reader

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
.
Chapter 6 Hardware removal and installation
81