Microprocessor - Lenovo ThinkCentre M70c Hardware Maintenance Manual

7. Remove the power supply assembly.
8. Install the power supply assembly.
9. Connect the new power supply assembly cable to the system board.
10. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

Microprocessor

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 56.
2. Remove the heat sink and fan assembly. See "Heat sink and fan assembly" on page 75.
84
M70c Hardware Maintenance Manual