Using The Radio Data System (Rds); (Models Of Area Code Cel, Cek Only) - Sony STR-DN1000 Operating Instructions Manual

7
Press .
The station is stored as the selected preset
number.
8
Repeat steps 3 to 7 to preset
another station.
You can store station as follows:
• AM band: AM 1 to AM 30
• FM band: FM 1 to FM 30
Tuning to preset stations
1
Repeat steps 1 and 2 of
"Presetting FM/AM radio
stations".
2
Press V/v repeatedly to select
the preset station you want.
Preset numbers from 1 to 30 are available.
Naming preset stations (Name
Input)
1
On "FM" or "AM" screen, press
V/v repeatedly to select the
preset number on which you
have stored the station and
which you want to name.
2
Press TOOLS/OPTIONS.
The option menu appears.
3
Press V/v repeatedly to select
"Name Input", then press
4
Press V/v/B/b to select a
character, then press
The name you entered is registered.
54
GB
Using the Radio Data
System (RDS)
(Models of area code CEL, CEK
only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Receiving RDS broadcasts
Simply select a station on the FM
band using Direct Tuning (page 52),
Automatic Tuning (page 52), or
Preset Tuning (page 53).
When you tune in a station that provides RDS
services, "RDS" lights up and the program
service name appears on the display.
Notes
• RDS may not work properly if the station you
tuned to is not transmitting the RDS signal
properly or if the signal strength is weak.
• If there is an emergency announcement by
government authorities, "ALARM" flashes in the
display.
.
• When the message consists of 10 characters or
more, the message scrolls across the display.
• If a station does not provide a particular RDS
.
service, "NO XXXX" (such as "NO TEXT")
appears on the display.
• When a station broadcasts radio text data, it is
displayed at the same rate at which it is sent from
the station. Any change in this rate is reflected in
the display rate of the data.
• The RDS information is shown on the display of
this receiver.