Changing The Display - Sony STR-DN1000 Operating Instructions Manual

Changing the display

You can check the sound field, etc., by
changing the information on the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change cyclically as follows.
All inputs except the FM and AM
band
Input name you selected
name t Sound field currently applied t
Volume level t Stream information
FM and AM band
Program Service name
a)
name t Frequency t Program Type
b)
indication t Radio Text indication
Current Time indication (in 24-hour system
b)
t Sound field currently applied t
mode)
Volume level
a)
Index name appears only when you have assigned
one to the input or preset station (page 48, 54).
Index name does not appear when only blank
spaces have been entered or it is the same as the
input name.
b)
RDS
During reception only (Models of area code
CEL, CEK only) (page 54).
Note
Character or marks may not be displayed for some
languages.
Tip
You cannot switch the display while "GUI" is shown
on the display. Press GUI MODE repeatedly to
select "MENU OFF".
a)
t Original input
b)
or preset station
b)
t
Performing Auto Calibration
For details on the Auto Calibration, see
"9: Calibrating the appropriate speaker
settings automatically (Auto Calibration)"
(page 39).
See "Before you perform Auto Calibration"
(page 39) before performing the Auto
Calibration.
To operate on the receiver
1
Press GUI MODE repeatedly to select
"MENU OFF".
2
Press AMP.
Receiver operation is enabled.
3
Press MENU.
4
Press V/v repeatedly to select "<AUTO
CAL>" , then press
5
Press V/v repeatedly to select "A.CAL
START", then press
measurement.
Measurement starts in 5 seconds. A count
down is displayed.
Note
While the time is counting down, stand away
from the measurement area to avoid
measurement error.
6
Measurement starts.
The measurement process will take
approximately 30 seconds. Wait until the
measurement process completes.
To cancel Auto Calibration
The measurement will be canceled when you
do the following:
– Press ?/1, input buttons or MUTING.
– Press SPEAKERS on the receiver.
– Change the volume level.
– Connect the headphones.
.
to start the
continued
81 GB