Turning The Unit On And Off - Panasonic FZ-N1 Series Operating Instructions Manual

1.
Insert the adaptor straight into the rear indentation as shown in the illustration, and insert into the DC
input jack ( ).
•
Plug the power plug into a power outlet.
2.
Rotate the adaptor downward (
•
The battery is not charged at the time of purchase. Charge the battery before turning on the unit for
the first time or after an extended period of storage.
•
Charge the battery in environments with an ambient temperature of 10 °C to 35 °C (50 °F to 95 °F).
•
The indicator lights in orange while the battery is charging, and lights in green when charging is
complete.
•
The unit prevents overcharging of the battery by charging only when the remaining battery level is
less than approximately 95 % of its full capacity.
•
You can also charge the unit by connecting it to the USB port of a computer or other device using
a USB connection cable.
Note
•
When removing the USB connection cable, make sure to remove it while holding the plug. Do not pull
by the cable.
•
When connecting a USB connection cable, note the shape of the micro USB plug and the micro USB
port. Do not attempt to connect the USB connection cable upside down.
•
Remove any dust or water droplets from plugs before connecting them. Do not use excessive force
when inserting plugs or insert them at an angle.
Confirming the battery level
The battery level is displayed in the upper-right corner of the screen, in the status bar.
Fully charged
You can also confirm the specific amount of battery level remaining. Swipe up the home screen, and then
in the app list, tap [Settings] ® [Battery].

Turning the unit on and off

Turning the unit on
Press and hold (power button) on the top of the unit until the unit briefly vibrates.
), and firmly insert the unit until you hear a click (
Charging Very low
Operating Instructions - Reference Manual
Getting started
).
21