Panasonic FZ-N1 Series Operating Instructions Manual page 57

4.
Adjust the hand strap to fit on your hand, and then fold back and fasten the belt. (If the belt is too long,
insert it into the hole (
•
Insert your hand into position
•
Fold back and fasten the belt so that the white line (
visible, the belt may come loose because it is not fastened enough.
•
If the belt is long or if the extra length of belt is not inserted into the hole, the belt may be included
when using the camera of the unit. Adjust the belt so that it does not interfere with the camera.
5.
Pass the attachment lace through both strap attachment holes of the unit (
lace to the hand strap ring (
•
Pass the attachment lace as shown in the illustration.
•
Secure the attachment lace to each ring.
•
Make sure that the attachment lace is secured to the ring.
6.
Close the pad (
•
Make sure not to close the pad over the hand strap.
•
A pen holder (
•
To remove, follow the procedure for attaching in reverse.
).)
as shown in the illustration.
).
) and fasten.
) is also attached.
) on the belt is not visible. If the white line is
), and then secure the
Operating Instructions - Reference Manual
Supplementary items
57