Step 2: Charging The Battery Pack - Sony Handycam DCR-SR32E Instruction & Operation Manual

Step 2: Charging the battery pack

1
Battery
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 112) after
attaching it to your camcorder.
b Notes
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
1
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2
Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (The default setting).
3
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
5
DC IN jack
DC plug
2
POWER
switch
CHG
3
(charge)
lamp
4
AC Adaptor
Mains lead
4
Connect the mains lead to the AC
Adaptor and the wall socket.
5
Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts.
The CHG (charge) lamp turns off when
the battery pack is fully charged.
• When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
5
To the wall socket
13