4
Mounting and installation
Mounting instructions
4.2 Mounting instructions
Mounting instructions
Wall mounting
Cable ducts on the wall
Panel mounting
12 | 70
●
Mounting instructions A6V10733764 are enclosed with the devices.
●
Remove the breakout on the housing before putting the cable into the gaining
channel.
●
If 4-wire cables are used for daisy chain wiring, remove the cable coating, as it
will not fit in the gaining channel.
●
Keep a distance of at least 20 mm from the base plate to any object above the
base plate such as cable ducts to snap the device cover onto the base plate.
A6V11471220_en--_e