Table of Contents
Advertisement
V
. MAINTENANCE
WARNING
To avoid severe personal injury, always remove
the battery pack from the tool before starting any
maintenance procedure.
CAUTION:
To assure product SAFETY and RELIABILITY,
servicing should be performed by an authorized
service center. Always insist on genuine
Panasonic replacement parts.
Cleaning Tool
Keep your tool clean for good cutting perform-
ance, and to help keep it safe to use.
Follow these steps:
1. Remove the battery pack from the tool.
2. Wipe the tool with a dry, soft cloth. Do not
use a wet cloth or cleaning liquids.
They could damage the cutter's finish.
3. Be sure to rub off any oil or grease which
could make the tool slippery or hard to han-
dle.
4. Remove the blade and brush off any dust.
CAUTION:
To avoid injury or damage to the unit, never im-
merse any part of the tool in a liquid.
Transparent Guard
WARNING
If the guard is cracked, or is broken, take the tool
to an authorized service center for replacement.
Do not attempt to operate cutter. It could result in
serious personal injury.
Never use your tool with a damaged transparent
guard or without the transparent guard installed.
Flying chips could result in serious injury.
VI
. ACCESSORIES
WARNING
• The use of any accessories not specified in
this manual may result in fire, electric shock,
or personal injury. Use recommended ac-
cessories only.
• Use of a blade on material that is thicker or
thinner than that recommended for that
blade will result in a rough cut, and could
increase the risk of "kickback" or other in-
jury.
Carbide-tipped Blade for Metal
• EY9PM13C
For cutting unhardened ferrous material
Carbide-tipped Blade for Thin Metal (Optional
accessory)
• EY9PM13D
For cutting unhardened thin ferrous material
Carbide-tipped Blade for Wood (Optional ac-
cessory)
• EY9PW13A
For cutting wood
Carbide-tipped Blade for Thin Wood (Optional
accessory)
• EY9PW13B
For cutting thin wood
Carbide-tipped Blade for Plastic (Optional ac-
cessory)
• EY9PP13B
For cutting plastic material
Vacuum hose adaptor (Optional accessory)
• EY9X012E
Rip Fence (Optional accessory)
• EY3500B7727
For convenience of rip cuts and repeated cut
of uniform width
- 17 -
Advertisement
Table of Contents
