Sony ExwaveHAD DXC-390 Instructions For Use Manual page 11

 MENU LOCK ON/OFF switch
When this switch is set to ON, the menu is not displayed on
the screen even if you press the MENU button.

DC IN/VBS (DC input/video signal output)
connector (12-pin)
Connects to the CMA-D2 camera adaptor. Inputs the DC
power and outputs the video signal.
 TRIG IN connector (BNC type)
Connects to a commercially available slave unit by
converting to BNC type in strobe mode.
 LENS connector (6-pin)
Connects to a lens control cable when attaching the zoom
lens especially designed for this camera.
 VIDEO OUT
connector (BNC type)
Outputs a composite video signal.
 REMOTE
connector (mini DIN 8-pin)
Connects to the RM-C950 remote control unit (not
supplied).

RGB/SYNC connector (D-sub 9-pin)
Outputs RGB signals and their respective sync signals.
Use the CCXC-9DB/CCXC-9DD/CCMC-9DS connecting
cable for the connection with the CMA-D2 camera adaptor.
11
Chapter 1 Overview (GB)