Sony ExwaveHAD DXC-390 Instructions For Use Manual page 20

Adjusting and Setting with Menus
Selection Function
AE AREA 3 Move the cross cursor appearing at the right bottom
(Continued) corner with the
and right side size, then press the ENTER button.
Move Window
Cancel
MENU
4 Move the AE window to the desired position with the
   
, , or button, then press the ENTER button.
Note
To cancel the setting before completing the procedure,
press the MENU button.
AE SPEED Sets auto exposure focusing speed in AGC, CCD IRIS or
auto-iris control mode.
Selects from MID (normal speed), FAST (fast speed) and
SLOW (slow speed).
Note
If lens hunting occurs, adjust with AE SPEED.
AE DETECT Selects the detection method of the luminance level of
the selected AE window.
AVERAGE: Selects to detect the average luminance
level of the whole AE window.
PEAK: Selects to detect the part with the highest
luminance level.
20
(GB) Chapter 2 Operation
   
, , or button to set the lower
Move Cross Cursor
Fix Back
ENTER BARS
CONTRAST menu
Adjusts the contrast of the image.
<CONTRAST>
>EFFECT
KNEE POINT
BLACK STRETCH
GAMMA
LEVEL
MASTER PEDESTAL
R. PEDESTAL
B. PEDESTAL
Select
Setting items in the CONTRAST menu
Setting item Contents of setting
EFFECT Adjusts the picture contrast in
accordance with the incident luminance
level.
KNEE POINT Sets the knee point.
BLACK Adjusts the luminance of a dark portion
STRETCH of the screen.
GAMMA Activates gamma compensation.
LEVEL Adjusts the gamma level.
MASTER Sets the pedestal level of the output
PEDESTAL signal.
R./B. Finely adjust the pedestal level.
PEDESTAL
[A]
MANUAL
MID
+ _
0
ON
+ _
0
+ _
0
+ _
0
+ _
0
Back
MENU
Ref. page
21
21
21
21
21
21
22