Advertisement
3
Installing Drain pump kit
• Unscrew the three screws on the left of the electric parts box of the air conditioner, and secure the
fixture plate for the Drain pump unit using the three screws aligning the hole positions.
• Attach the Drain pump unit top plate to the air conditioner using the support bracket
(Use the attached tapping screws
Air conditioner screws
4
Installing the Attachment plate
• Attach the attachment plate
• Use the attachment plate
• To install the fixture band
secure the fixture band
install the fixture.
(Since thread shearing may occur when an electric screwdriver is used, stop using it halfway and then
tighten the screw manually.)
and the air conditioner screws.)
Drain pump unit
to the air conditioner at the position shown below.
as a 20-degree ruler for the socket
, unscrew the screw located 335 mm away from the drain port, and then
with the screw. Drill a hole to the right with the tapping screws
335
24
30
65
30
3
.
Air conditioner screw
and drain pipe
.
Drain port
Secure the attachment
plate with the removed
screws.
, and then
Advertisement
