Single type
Twin type
Triple type
When constant speed is desired, tighten the
adjuster to maintain the desired throttle set-
ting.
EMU35711
Station selector switch
The station selector switch can select either
the main station or sub station for the digital
electronic control which operates the boat.
The digital electronic controls of the main sta-
tion and sub station have the same functions.
You can change the station when the main
switch is turned to "
vers are in Neutral.
The switch panel can be operated at both the
main station and sub station when the main
switch is set to "
ZMU05820
EMU35720
Engine selector switch
When all engines have started, you can select
the desired engine for operation by pushing
ZMU05819
the engine selector switch. The engine selec-
tor switch works only when all the control le-
vers are in neutral.
ZMU05963
1. Engine selector switch
EMU35772
Engine shut-off cord (lanyard) and
clip
The clip must be attached to the engine shut-
off switch for the engine to run. The cord
should be attached to a secure place on the
operator's clothing, or arm or leg. Should the
Components
" (on) and all control le-
" (on).
ZMU05976
ZMU05977
1
27