Tilt Support Lever For Power Trim And Tilt Model; Cowling Lock Lever (Pull Up Type) - Yamaha F250B Owner's Manual

ECM00840
NOTICE
The trim tab also serves as an anode to
protect the engine from electrochemical
corrosion. Never paint the trim tab as it will
become ineffective as an anode.
1. Trim tab
2. Bolt
3. Cap
Bolt tightening torque:
42.0 Nm (4.28 kgf-m, 31.0 ft-lb)
EMU26341
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up po-
sition, lock the tilt support lever to the clamp
bracket.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the tilt
position.
EMU31421

Cowling lock lever (pull up type)

To remove the top cowling, pull up the cowling
lock lever(s) and lift off the cowling. To install
the top cowling, place it in its original position,
and then move the cowling lock lever(s)
downward to lock it in place.
Components
33