Bosch rexroth HyDrotrAC GFt Operating Instructions Manual page 15

General information concerning damage to property and product damages | HyDrotrAC GFt >130 knm 1 5/64
Damage to the planetary gearbox caused by cleaning agents or solvents!
Damage caused by aggressive detergents or solvents and/or fiber from cleaning
cloths getting into the planetary gearbox!
f When removing the preserving agent make sure that no aggressive detergents or
solvent enters the seal areas, the hydraulic system, or the planetary gearbox.
f Only use a dry cloth made of lint-free fabric to remove lubricating oils and other
soils.
Damage to the planetary gearbox caused by mechanical stress!
Oil lines and hoses which you install under tension cause additional mechanical
stress during operation, which reduces the service life of the gearbox!
f Assemble hydraulic lines and hoses without mechanical stress.
f Ensure vibration-free fastening of tubings.
f Only use hoses and fasteners which have been approved for the respective
operating pressure range.
risk of environmental pollution!
Ground water and/or soil contamination by escaping or spilled lubricating oil or
pressure medium!
f Place a catch basin with sufficient capacity under the planetary gearbox when
replacing, draining lubricating oil, or working with a pressure medium.
f Bond any passing flow of lubricating oil or spilled lubricating oil or pressure
medium with appropriate absorption material such as oil absorbent granule.
f Dispose the lubricating oil or pressure medium in accordance with local country
regulations and provisions.
f Observe the product data sheets and safety data sheets of the lubricating oil
manufacturer and pressure medium manufacturer. These data sheets are not
included within Rexroth's scope of supply.
Damage to the planetary gearbox caused by improper handling!
Damage to the planetary gearbox during installation into the machine or chassis
frame, maintenance and repair work and during disassembly!
f Avoid strong impacts on the planetary gearbox during assembly or disassembly.
f Never use the mounting parts as a handle or step.
f Make sure that the planetary gearbox is not canted.
Damage to the planetary gearbox and mounting parts!
Material damage caused by securing and lifting equipment!
f When lifting the planetary gearbox, take care that mounting parts do not get
damaged by securing or lifting equipment.
CorreCtion Copy 1 |17.10.2019 | onLy For internAL USe
NOTE
RE 79094, Issue 10.2019, Bosch Rexroth AG