Table of Contents
Advertisement
The packaging before sterilization is as follows.
1) Put the probe into TYVEK
pouch.
2) Seal the TYVEK Pouch using
a heat sealer. Ensure that
the seal is complete.
3) Put the sealed pouch into a
tray or plastic mesh wire
for sterilization.
Fig. 4
Packaging in the pouch
Fig. 5
Tray for
sterilization
Fig. 6
-10-
Probe
TYVEK Pouch
Sealed
Probe
TYVEK Pouch
Sealing
Probe in
the Pouch
Packaging in a tray
Q1E-EP0415
Advertisement
Table of Contents
