Fine Tuning - Beko 19WLP530HID Operating Instructions Manual

3.3.2 Manual tuning of analog channels and storing in the memory
3.3.2.1 If you already know the channel number
Analogue Manual Tuning
System
Channel

Fine tuning

Search
Programme no
Skip
Frequency
Select
Select the system in which you would like to make the search from the System tab
by pressing the Right/Left movement buttons and move to the Channel tab by
pressing the down movement button. Press OK on your remote control to select
"S"" band or "C"" band and enter the channel number with numeric buttons. Move
onto the Program No tab and enter the channel number in which you would like to
have the channel stored. If the broadcast viewed on the screen is of your desired
quality, press the Red button on your remote control to store the action into memory.
The channel will be stored according to the program number of your choice. You can
tune and store in memory other channels the same way. In the event that you wish to
exit the menu for any reason, simply press the EXIT button.
3.3.2.2 If you do not know the channel number
Analogue Manual Tuning
System
Channel
Fine tuning
Search
Programme no
Skip
Frequency
Select
In the Program no tab, enter the channel number where you would like to store the
searched channel. Select the system in which you would like to make the search
from the System tab by pressing the Right/Left movement buttons and move to
the Channel tab by pressing the down movement button. Press OK on your remote
control to select "S"" band or "C"" band, scroll to the Search tab by pressing
the down movement button and press Right/Left movement buttons to start the
search. Press the Red button on your remote control to store the channel you found.
The channel will be stored to the channel number of your choice.
3.3.2.3 Fine Tuning
If the channel you found is not of the desired quality and requires Fine Tuning, then
select the Fine tuning tab by pressing the Down movement button in the Analogue
Manual Tuning menu. Using the Left/Right movement buttons on your remote
control, adjust the broadcast displayed on the screen to your desired quality. Under
normal circumstances, you will not require to use the Fine Tune function. The AFC
values of your television will automatically adjust and lock themselves to the channel.
However, you might need it in case the television transmitters do not operate
according to the standards. Press the Red button on your remote control to store the
settings you made.
Helpdesk: 0845 600 4911
Select Analogue Manual Tuning by pressing the Up/
Down movement buttons in the CHANNEL SETUP menu
and confirm by pressing the OK button. Analogue Manual
I
Tuning menu will be displayed.
C 4
+00
Note: Select SYSTEM I for UK.
1
No
62.25 Mhz
Save
Back
Exit
Select Analogue Manual Tuning by pressing the Up/
Down movement buttons in the CHANNEL SETUP menu
and confirm by pressing the OK button. Analogue Manual
I
Tuning menu will be displayed.
C 4
+00
Note: Select SYSTEM I for UK.
1
No
62.25 Mhz
Save
Back
Exit
-15-