Mitsubishi Electric 800 Series Manual page 41

CC-Link IE TSN function
 Parts
NOTE
• Do not remove the CC-Link IE TSN communication circuit board or the earth plate.
 Connection cable
For wiring, use the 1000BASE-T compliant Ethernet cables.
Ethernet cable
Category 5e or higher
(Double shielded/STP) Straight cable
Recommended products (as of February 2015 )
Model
SC-E5EW series Mitsubishi Electric System & Service Co., Ltd.


SC-E5EW cable is for in-enclosure and indoor uses. SC-E5EW-L cable is for outdoor use.
NOTE
• For CC-Link IE TSN wiring, use the recommended wiring components by CC-Link Partner Association.
• Depending on the cable connector shape, the cable may not be able to be connected to the communication connector.
 Hubs
To connect only the authentication class B devices in star topology when the communication speed of the master station is 1 Gbps, use a CC-Link IE TSN
compatible switching hub (TSN switching hub).
• Industrial switching hub
Name
TSN switching hub
8
WIRING
X16 X1
RUN ACT
LINK1 ERR
LINK2 L.ERR
Connector
RJ-45 connector
Manufacturer
CC-Link IE TSN compatible switching hub compliant with the CC-Link IE TSN conformance class B
certified by the CC-Link Partner Association.
Switches for manufacturer setting
Rotary switches for station number setting
CC-Link IE TSN communication
circuit board
Operation status indication LED
Connector for communication (PORT2)
Connector for communication (PORT1)
Earth plate
Type
The following conditioning cables:
• IEEE 802.3 (1000BASE-T)
• ANSI/TIA/EIA-568-B (Category 5e)
Description