What To Do If - Frigidaire FYD00226WC User Manual

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling the service technicians, before contacting the service centre please carry out the check
listed below.
PROBLEM
Does not work
Water not cold
from cold tank
Excessive heating
around dispenser
body
Noise
Water leakage
Unpleasant taste
of water
Steam coming out
of dispenser
POSSIBLE CAUSE(S)
Electric plug out of the
socket.
Bonded in different voltage. Connect in correct voltage.
Lack of electric power or
fuse blown.
Voltage drop.
Electric plug out of the
socket.
Cold water switch is not on
The appliance very close to
a wall.
Ventilation vents obstruc-
ted.
Product leaning on the wall.
Uneven placement.
A hole or a crack in the bot-
tle.
Overflow in the water col-
lector.
Drainage cap not well tight-
ened.
Cleaning is made with non
recommended material.
Poor-quality water.
Water bottle shoddy.
Excessive heating inside the
hot water tank.

WHAT TO DO IF

SOLUTION
Plug in.
Wait for electric power ON or change
fuse.
Use a voltage stabilizer.
Plug in.
switch on the cold water switch
The appliance must be at least 25 cm
from the wall.
Clear the ventilation vents.
The product must be at least of 25 cm
from the wall.
Even the appliance.
Replace the water bottle.
Empty the water collector.
Tighten the cap.
Follow cleaning/sterilization procedure
correctly.
Make sure that the mineral water sup-
plier is of good quality.
Replace the water bottle.
Disconnect the main power source and
call service centre.
9