Preparing Sandwiches - Silvercrest SSWM 1400 A1 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

RP102842 Sandwichmaker LB1 Seite 41 Donnerstag, 11. September 2014 3:23 15
Notes
— We recommend a toasting loaf for
making sandwiches.
— Prepare
the
switching on the appliance.
— As far as possible, spread the filling so
that the sandwiches are of an even
thickness.
1. Select a location for the appliance
which is firm, level and non-flammable.
Maintain a distance of approx. 50 cm
from other objects.
2. Unwind the mains cable completely.
3. Open lock 5.
4. Lift open lid 6, taking hold of the appli-
ance by lid handle 4.
5. Wipe off any dust with a dry cloth.
6. Close lid 6.
7. Close lock 5.
8. Insert the power supply plug into a suita-
ble mains socket.
Red indicator light 1 now comes on and
the appliance heats up.
As soon as operating temperature has
been reached, green indicator light 2
comes on.
The appliance is now ready to use.
9. Open lock 5.
10.Lift open lid 6, taking hold of the appli-
ance by lid handle 4.
11. Place the prepared sandwiches in the
moulds 7.
12. Close lid 6.
13.Close lock 5.
Notes
— Depending on the thickness of the
sandwich and the desired degree of
SSWM 1400 A1

6. Preparing sandwiches

sandwiches
before
browning, the toasting process takes a
number of minutes (approx. 4 - 8
minutes).
— During toasting, green indicator light 2
will go off and come back on. This
controls
the
required
temperature.
Warning! When you open lid 6,
hot steam may rise towards you. You
should therefore protect your hands
with a tea towel or oven gloves.
14.Proceed as described below to check
whether the sandwiches are ready.
– Open lock 5.
– Lift open lid 6, taking hold of the
appliance by lid handle 4.
15.Proceed as described below if the sand-
wiches are not ready.
– Close lid 6.
– Close lock 5.
16.As soon as the sandwiches have been
toasted to your taste, remove them from
the appliance.
Caution! Only use implements made of
wood or heat-resistant plastic. Metal imple-
ments might damage the coated surfaces.
17. Remove the power supply plug from the
mains socket after use. This is the only
way to ensure that the appliance is
completely de-energized.
operating
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

102842

Table of Contents