1MRS756123
4.6.4.
COM600 Station Automation Series
Operator's Guide
Figure 4.6.3-2 Tap Changer Mode dialog
Busbar coloring
Busbar coloring can be used to indicate the status of busbar sections in several different
ways. It can indicate which busbar sections are powered, unpowered or in certain other
states, or which voltage level each busbar section has, see Figure 4.6.4-1. Alternatively,
each voltage source or voltage source type can have a color that is used for sections they
are connected to. Busbar coloring can also be used to indicate if two or more voltage
sources form a loop.
COM615 3.1
tap_changer_mode.bmp
31