Busbar Supply Terminals; Halogen-Free Materials And Wiring; Additional Wire Markings; Example Connection Diagram - ABB ACS800-07 Manual

30

Example connection diagram:

Note 1: Contact load capacity AC-14, 230 VAC, 2 A

Busbar supply terminals (G317)

The option provides input busbar terminals that are suitable for connecting busbar
trunking systems.
The option is available only for ACS800-07/17/37 frames n×R8i.
Other required options: +F253 or F255.

Halogen-free materials and wiring (G330)

The option provides halogen-free cable ducts, control wires and wire sleeves, thus
reducing toxic fire gases.
Additional wire markings (G338...G342)
As standard, only drive input and output terminals, plug-in connectors, fibre optic
connectors and ribbon cables are marked.
The wire marking options are described below.
Option Additional markings
code
G338 Equipment pin numbers are printed on
wires between modules and on wires
connected to equipment.
G339 Equipment and terminal block pin
numbers are printed on wires between
modules and on wires connected to
equipment and terminal blocks. Main
circuit conductors are marked.
Heaters, external control voltage (G)
Wire
T3/S
T3/S