Table of Contents
Advertisement
5.How to use your EasyKey
Unlock | Unlock from outside
With User PIN code
With fingerprint
1
2
Touch
keypad
Enter a
PIN code
3
1
Press the
handle
Fingerprint
Place your registered
1
Touch the keypad and
1
finger properly on the sensor.
light up the buttons.
After hearing a voice
2
Enter the registered
2
prompt of "Door opened",
user PIN code and press [#]
to confirm.
press the handle to open
the door.
3
After hearing a voice
prompt of "Door opened", press
the handle to open the door.
Unlock | Unlock from inside
With handle
Philips EasyKey employs indoor
fast opening motise allowing
you to directly press the handle
to unlock.
Attention
When you want to open the door
from inside, please make sure the
safe handle switch is toggled to
green scale and the safe handle
function is disabled.
16
With card
2
1
2
Press the
Card
handle
reader
Press the
handle
Place your registered
1
card on the card reader.
2
After hearing a voice
prompt of "Door opened",
press the handle to open
the door.
Lock | Lock from outside/inside
Lock from outside
Lock from inside
Lift the handle after closing
the door. Then the bolt will
pop up and door will be
locked.
Deadlock from inside
When the EasyKey is locked, you can
rotate the knob to red scale (as shown
in the left image) to enable inside
deadlock. Also rotating the knob to
green scale can disable the function.
Lift the handle after closing
the door. Then the bolt will
pop up and door will be
locked.
17
Advertisement
Table of Contents
