Installation Precautions - Whirlpool HB124 Operation Manual

2.Installation Precautions

● This product should be installed in the place where can bear the weight of this goods.
● Incorrect installation may cause noise, empathy. Please assembly properly.
● In order not to cause the dew flowing back from exhaust pipe to the bathroom, the
exhaustpipe should always be set in downward sloping to the outdoor.
● The ventilation resistance of the ventilation flap is the main reason which causes the
decrease of air volume and high noise, please use this appropriately.
● When installing the machine, the Front Cover shall be not less than 1.8 meters off the
ground.
● Not allow being installed in the hot furnace directly above and a place for more than 40
degrees.
● Please set airflow intake to promote convection.
● Do not change the product's rated features.
● Prohibiting using any installation method beyond the specified in the user manual.
● The ceiling openings should face down in order to ensure the product level installation.
● Please take appropriate measures to prevent gas from the exhaust pipe or other fuel
burning equipment flowing back to the room.
● Before installing this product, please ensure that the power has been cut off.
● When the flammable gas leaks, stop using it and turn off the machine and all its function.
● Do not cover heater outlet, otherwise it may cause a fire due to overheating.
● Do not install too close to the electrical outlet in order to prevent damage of the machine,
for it may cause damage of other electrical appliances.
● Prohibit using any programmes or timer automatically connected to the power or any
other devices to use this product. Otherwise it will cause damage to the product, or fire.
● Do not install this product near curtains and other flammable materials to prevent any
danger.
● Do not let people in the bathroom or shower zones touch the remote control.
● Do not expose this product directly under the shower.
● When installing and using ,do not remove the main circuit cover plate, otherwise it will
cause electric shock or fire.
● This product is not suitable for the disabled, mental retarded or mental disorder, or those
who are lack of experience and common sense (including children) unless they are under
guidance. During the period of maintenance, children should be taken special care of and
do not let them play the machine as toys.
● When the power cord is damaged, please ask for person who is designated by the
manufacturer for replacement in accordance with the requirements of specification, it is
forbidden to let users to replace the power cord by themselves.
● Product installation and maintenance should be done by professional designated
by the manufacturer.
● To make sure that a switcher is availeble for completely cutting off the power,refer to
diagram below.
Switcher (compiete
power cutoff)
Remote control
-03-
Main Body