Toro Greensmaster 3100 Quick Start Manual page 2

Installing the Kit on the
Greensmaster 3100 (Model
04356) and 3150 (Models 04357
and 04358)
1. Locate, mark, and drill 3 holes (13.5 mm [0.53 inch]
diameter) on each side of the rear castor fork as shown
in Figure 1.
1. 127 mm (5 inches)
2. 95.3 mm (3.75 inches)
3. 37.7 mm (1.49 inches)
2. Attach a weight to each side of the castor fork using 3
bolts and 3 locknuts for each side
1. Bolt (6)
2. Weight
Figure 1
4. 37.4 mm (1.47 inches)
5. 74.8 mm (2.95 inches)
(Figure 2).
Figure 2
3. Locknut (6)
Installing the Kit on the
Greensmaster 3200 (Model
04380), 3200-D (Model 04381),
and 3250-D (Models 04383 and
04384)
1. Locate, mark, and drill 3 holes (0.53 inch [17/32 in.]
diameter) on each side of the rear castor fork as shown
in Figure 3.
1. 127 mm (5 inches)
2. 95.3 mm (3.75 inches)
3. 30.1 mm (1.19 inches)
2. Attach a weight to each side of the castor fork using 3
bolts and 3 locknuts for each side
1. Bolt (6)
2. Weight
2
Figure 3
4. 37.4 mm (1.47 inches)
5. 74.8 mm (2.95 inches)
(Figure 4).
Figure 4
3. Nut (6)