Term - Hitachi 4HK1 Workshop Manual

Service Information Guide (All) 14A-9

Term

1. Term
Nominal dimension
Refers to standard values during production.
Specified value
Refers to specified values for inspection, adjustment,
assembly, and installation.
Limit
Refers to maximum or minimum values that should not
be exceeded during maintenance.
Parts exceeding these values must be repaired or
replaced.
Warning
Refers to a precaution which may lead to injury if not
observed.
Caution
Refers to a precaution which may lead to equipment
damage if not observed.
Note
Refers to special notes that give instruction, guidance, or
use conditions related to use, operation, repair, etc.