New Prismasync Controller Features; New Hardware; Paper Input Module-A1; Duo Paper Tray-A1 - Canon Oce VarioPrint 6000 Ultra+ Series Manual

2.4 New PRISMAsync Controller Features

• Supports IPv6 and IPv4 IP addresses
• Number of hot folders has been increased to 250.
• Improved readability of Asian fonts on GUI
• Korean language support on the operation panel
• Handles non-collated copies, including set/sheet-recovery
• Supports Adobe 30.20
• Ability to edit media sizes on the operation panel
• Displays progress information on uncompleted jobs in the waiting queue
• Ability to make custom media sizes as the default paper size from the PCL driver
• Ability to automatically shutdown the system with shutdown timers
• Ability to install and upgrade software with the use of USB memory access
directly on the operation panel
IMPORTANT
Do not turn ON or reboot the PRISMAsync controller or engine if there is a USB
stick inserted into the operator panel, unless instructed by a TSM (Technical
Service Manual) procedure.

2.5 New Hardware

The new hardware described below is only supported by the VarioPrint 6000+
Series engines. Previous machine model engines cannot be upgraded.

2.5.1 Paper Input Module-A1

Flexible media sizes (320 mm to 350 mm by 450 mm to 500 mm)

2.5.2 Duo Paper Tray-A1

• Capacity per tray is 3,400 medium size sheets (left stack: 1,800 sheets; right
stack: 1,600 sheets)
• Increases PIM-A1's media capacity to 8,000 sheets

2.5.3 PRISMAsync VP6000+-A1

• T20 iBase type
• Intel i5 2.4 GHz – up to 30% performance gain in RIP processing
• 4 GB DDR 1333 MHz
• 2 x Gbit network ports that support 10/100/1000 Mb Ethernet
• 2 x 500 GB Hard Disk Drives
• Windows 7 platform
2 The 350 mm x 500 mm tray requires the optional large Paper Input Module 350x500mm-A1.
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document
Océ VarioPrint 6000+ Customer Expectations Document
2
Page 7