Advertisement
16 www.electrolux.com
4. Clean the Mesh Pre-filter
The mesh pre-filter is put together with
the filter lid at the back of the appliance,
it should be checked and cleaned at
least every 30 days or more often if
necessary.
NOTE: DO NOT PUT THE FILTER IN
A DISHWASHER.
a. Open the filter lid and you will find
the mesh pre-filter is put behind the
back of the lid.
b. Take out the mesh pre-filter from the
assembly.
c. Clean the mesh pre-filter with warm,
soapy water. Rinse and dry it by
airing before putting it back.
d. Reinstall the filter, then put the filter lid
back.
CAUTION!
DO NOT operate the appliance
without a filter because dirt and lint
will clog inside the appliance, which
will affect the performance..
6.2 Replace the HEPA particle
filter
See section "5.12 Filter Change Indicator"
for the details when and how to replace
the HEPA particle filter.
NOTE:
• Be different from the mesh pre-filter, the
HEPA particle filter can not be washed,
it can only be replaced.
Please visit electrolux.com to order your
replacement filter.
6.3 Storage
If you are not going to use the appliance
for a long time, please store it properly.
1. Unplug the appliance, then tidy up the
power cord using the tag at the back of
the unit.
2. Empty the water tank and clean the
mesh pre-filter.
3. Dry the appliance and all accessories by
airing.
4. Pack it with plastic bag or return it to its
carton then place the unit in a cool and
dry place.
Advertisement
