Philips EasyKey Alpha Series User Manual page 10

Install the compressed spring
6
and square shaft into the
inside escutcheon accordingly.
Tighten the M6
chamfer head
8
screws and the 2 M4
hexagon screws.
M6 Chamfer
Head Screws
M4 Hexagon
Screws
8
7
Put in the batteries
and close the
9
battery cover.
Then fix the
striker to finish
the installation.
Attention
After fixing the
striker, please
test if the door
can be opened
and closed
smoothly.
Insert the connection wire of the
outside escutcheon and the motor
wire into the corresponding holes on
the inside escutcheon,
then align the square
shaft on the inside
escutcheon with the
rotary hole on the
mortise and insert
it to make sure the
inside escutcheon
is kept close to the
inside of the door.
Attention
Please hide the extra
connecting wires into
the hole of the door.
Please check if all
components are
10
connected properly,
such as the push-
pull handle, the safe
handle switch and
the mechanical key.