6WHS Choose „Properties" from the „File" menu. On the „Connect to" tab, check, if the port (e. g.
COM1) to which your router is connected is selected.
6WHS Click „Configure" and make sure that the settings have the following values: Bits per second:
9600, Data bits: 8, Stop bits: 1, Flow control: Hardware. Click „OK" twice to leave configuration
mode.
6WHS Choose „Connect" from the „Call" menu to establish a connection to the router.
Siemens Remote Service
Installation instruction
COIT-000.812.06.022.02
Rev. 02
02-02
Seite 11/13
CO SGK
Medical Solutions
Siemens AG