Black & Decker BXAC12001E Instruction Manual page 6

ENGLISH (Original instructions)
industry.
♦ Repairs must be performed based on
the recommendation from the manu-
facturing company. Maintenance and
repairs that require the assistance
of other qualified personnel must be
performed under the supervision of
an individual specified in the use of
flammable refrigerants.
SAFETY ADVICE AND WARN-
INGS
♦ This appliance may be used by
children aged 8 years and over
and persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge, if they
have been given appropriate super-
vision or training in the use of the
appliance in a safe and Understand
the dangers involved.
♦ This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
♦ Do not allow children to perform
cleaning and maintenance without
supervision.
♦ Install the appliance in accordance
with national wiring regulations.
♦ Leave a space of 30cm between
walls or other obstacles and the
appliance. Do not cover or obstruct
the sides of the appliance, leaving
at least 30 cm space around the
appliance.
6
♦ The product requires adequate venti-
lation in order to function properly.
♦ The fuse used in the appliance is
type: AC 3.15A, electrical characte-
ristics: 250V.
♦ If the mains connection is damaged,
it must be replaced. Take the appli-
ance to an authorized service center.
Do not attempt to disassemble or
repair it yourself as it may be danger-
ous.
♦ This appliance is intended for house-
hold use only, not for professional or
industrial use.
♦ Before connecting the appliance, check that the voltage
indicated on the nameplate matches the voltage on the
rating plate.
♦ Connect the appliance to a power socket that supports
at least 16 amps.
♦ The appliance plug must match the electrical socket
of the socket. Never modify the plug. Do not use plug
adapters.
♦ Do not force the connecting cable. Never use the power
cord to lift, carry or unplug the appliance.
♦ Do not wrap the power cord around the appliance.
♦ Check that the power cord is not pinched or bent.
♦ Do not allow the connecting cord to hang or touch the
hot surfaces of the appliance.
♦ Check the condition of the electrical connection cable.
Damaged or entangled cables increase the risk of
electric shock.
♦ It is recommended as an additional protection in the
electrical installation that feeds the device, the use of a
differential current device with a maximum sensitivity of
30 mA. Consult with an installer.
♦ Do not touch the plug with wet hands.
♦ Do not use the appliance with the damaged power cord
or plug.
♦ If any of the enclosures of the appliance breaks, imme-
diately switch off the appliance
♦ To avoid the possibility of electric shock.
♦ Do not use the appliance if it has fallen, if there are
visible signs of damage, or if there is a leak.