Table of Contents
Advertisement
D7024 | Operation and Installation Guide | 7.0 Control Panel Programming
7.0
Control Panel Programming
Main Menu:
SYSTEM NORMAL
SELECT:PROG/0
SELECT:CMD/#
SELECT:TEST
SELECT:HISTORY
SELECT:DISABLE
SELECT:DRILL
Programming Menu:
PROG/0
1- PROG TIME
2- SECURITY
3- PROG SYSTEM
4- PROG INPUTS
5- PROG OUTPUTS
6- PROG ACC’NTS
7- PROG FORMATS
8- HISTORY DEFLTS
9- PROGRAM MUX
7. 1
PROG Time
PROG TIME
1- SYSTEM
2- AUTO TEST
3- DAYLIGHT SAV
7. 1 . 1
Program Time
Shortcut:
0-PROG > 1-PROG TIME > 1-SYSTEM
The following window appears:
ENTER DATE
MMDDYY: ________
1.
Enter the date and press [#] to access:
ENTER TIME
HHMM: _________
2. Enter the time and press [#].
36
7. 1 .2
Automatic Test
Test Time
Shortcut:
-PROG > 1-PROG TIME > 2-AUTO TEST
0
This test allows you to program the time of day the
Automatic Test occurs using a 24-h clock. For example,
11:00 p.m. = 2300. The following window appears:
AUTOMATIC TEST
1- TEST TIME
2- TEST FREQNCY
1.
Press [1] to select Test Time. The following window
appears:
AUTO TEST TIME
HHMM: _________
2. Enter the time followed and press [#].
Test Frequency
Shortcut:
0-PROG > 1-PROG TIME > 2-AUTO TEST
This feature allows you to program how often the
Automatic Test Reports are sent. The first test is sent
when the programmed test time matches the system
time. Subsequent reports are sent according to the
selected interval. The following window appears:
AUTOMATIC TEST
1- TEST TIME
2- TEST FREQNCY
1.
Press [2] to select TEST FREQNCY and access:
AUTO FRQNCY (__)
1- 6 HOURS
2- 12 HOURS
3- 24 HOURS
4- 7 DAYS
5- 28 DAYS
2. Press the number key corresponding to your
selection.
The current setting appears in parentheses on the
first line.
3. After you program the test frequency, the preceding
window appears.
Bosch | 7/05 | 31499J
Advertisement
Table of Contents
