Download Print this page

Sealey CP108VMGBO Quick Start Manual

10.8v cordless multipurpose mini grinder & 50pc accessory kit - body only

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
WARNING! Remove the battery pack from the cordless multipurpose mini grinder before changing accessories, servicing or
performing any maintenance.
Maintain the cordless multipurpose mini grinder in good condition. Check moving parts alignment on a regular basis.
9
Replace or repair damaged parts. Use an authorised service agent and recommended parts only. Unauthorised parts may be
9
dangerous and will invalidate the warranty.
Ensure the cordless multipurpose mini grinder is switched off before installing the battery pack.
9
Keep the cordless multipurpose mini grinder clean for best and safest performance.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Evaluate your working area before using the cordless multipurpose mini grinder e.g. ceilings, floors and enclosures may contain
9
electrical items or water piping.
Ensure battery pack (sold separately) is correctly inserted into the cordless multipurpose mini grinder and latched in place before
9
attempting to switch on.
Secure loose work pieces with a clamp, vice or other adequate holding device (not supplied).
9
Avoid unintentional starting.
9
Wear approved safety eye protection (standard spectacles are not adequate).
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-skid shoes.
9
Keep children and unauthorised persons away from the working area.
9
Store the cordless multipurpose mini grinder and accessories in the original box, in a safe, dry, childproof area where the
9
temperature will not exceed 104°F (40°C).
DO NOT use the cordless multipurpose mini grinder where there are flammable liquids, solids or gases, such as paint solvents, etc.
8
DO NOT allow children to operate the cordless multipurpose mini grinder.
8
DO NOT operate the cordless multipurpose mini grinder if any parts are missing as this may cause failure and/or personal injury.
8
DO NOT hold unsecured work piece in your hand.
8
DO NOT leave the cordless multipurpose mini grinder operating unattended.
8
DO NOT carry the cordless multipurpose mini grinder with your finger on the power switch.
8
DO NOT use the cordless multipurpose mini grinder for a task it is not designed to perform.
8
DO NOT operate the cordless multipurpose mini grinder when you are tired or under the influence of alcohol, drugs or intoxicating
8
medication.
DO NOT get the cordless multipurpose mini grinder or battery wet or use in damp or wet locations.
8
DO NOT force the cordless multipurpose mini grinder. Use the correct tool for the job it was designed for.
8
DO NOT use any accessories other than those supplied with the cordless multipurpose mini grinder.
8
DO NOT use any accessory tools which require any liquid coolant.
8
2. INTRODUCTION
Compact, lightweight cordless multipurpose mini grinder and 50-piece accessory kit - body only. Comfortable composite housing with soft grip
to reduce vibration. 7-Speed settings provide the control required to complete various tasks. Quick release collet and spindle lock for fast tool
changes. Supplied with a 50-piece range of tips, wheels, discs, dressing stones and a chuck spanner. Integral LED working light and LED
battery level indicator. Requires compatible 10.8V 2Ah or 4Ah battery and mains charger, sold separately.
3. SPECIFICATION
Model no: ....................................................... CP108VMGBO
Battery: ......................................................10.8V 2aH or 4Ah
Consumable parts (battery) ....................................................
2Ah ...................................................................... CP108VBP
4Ah .................................................................... CP108VBP4
Collets: .........1.0 (x1), 1.7 (x1), 2.0 (x1), 2.4 (x1), 3.2 (x1)mm
Free speed: ................................................. 5000 - 25000rpm
© Jack Sealey Limited
10.8V CORDLESS MULTIPURPOSE MINI
GRINDER & 50PC ACCESSORY KIT - BODY
ONLY
MODEL NO:
Wear protective
Wear a mask
gloves
Original Language Version
CP108VMGBO
CP108VMGBO Issue 1 07/04/21

Advertisement

loading

Summary of Contents for Sealey CP108VMGBO

  • Page 1 CP108VMGBO MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 WARNING! The brush accessory tool can loose wire bristles during normal operation. DO NOT apply excessive pressure to the wire ‰ brush as the discarded wire bristles can easily penetrate light clothing and/or skin. fig.1 CP108VMGBO Issue 1 07/04/21 Original Language Version © Jack Sealey Limited...
  • Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...